This equipment has introduced advanced technology, independent
research and development of energy saving,environmentally friendly
new electric furnace, the device has a scientific and rational
design technology, elegant appearance, advanced and reasonable
structure, easy operation, high-quality cold-rolled steel shell,
the precision CNC machining, Luxury, beautiful two-color imported
epoxy powder electrostatic spray process from processing, high
temperature, corrosion-resistant, long-term from fade.
The furnace has a uniform temperature field, the surface
temperature of the double-layer heat-resistant furnace body is
close to room temperature, and the heating and cooling functions
are adjustable. The furnace adopts imported high-temperature
composite fiber materials and is constructed by a numerical control
process. Chilling heat, corrosion resistance, non-collapse, no
crystallization, no residue, no pollution, long service life.
The control system uses microcomputer intelligent adjustment
technology, with PID adjustment, automatic control, self-tuning
function,50 sections of programming, and the preparation of a
variety of heating, thermostat, cooling program, temperature
control accuracy.
Protection device using independent protection: (over-temperature,
over-voltage, super-current, broken even, power, leakage, short
circuit, etc.).
In addition, through our independent research and development of
control software, electric furnace and computer associated single
or multiple furnace can be achieved remote control, start the
electric furnace, stop the electric furnace, set the temperature
program, temperature program storage, view the history curve, print
Historical curve and so on.
| Furnace Type | Horizontal type(Max Working pressure:58bar/98bar |
| RDE-3312-N | RDE-4412-N | RDE-5512-N | RDE-5518-N |
| Usable Space (W*H*L) | 300*300*1200mm | 400*400*1200mm | 500*500*1200mm | 500*500*1800mm |
| Max.Charge Load | 300kg | 500kg | 1200kg | 1500kg |
| Power Rating | 320KVA | 320KVA | 430KVA | 600KVA |
| Heating Zone | 2/3 Zones | 3 Zones | 3 Zones | 3 /4 Zones |
| Cooling time | ≤5h | ≤6h | ≤7h | ≤8h |
Empty furnace, cooling from sintering temperature 2100℃ to 100℃. (water temperature≤26℃, water pressure 2-3bar, 55bar(95bar)≤Ar
pressure≤58bar(98bar). |
| Service Life | 20years/6000furnace cycles |
| Max. Working Temp | 2000℃ |
| Temperature Measurement | Special design High temperature W-Re5/26 Thermocouple |
| Max Vacuum Degree | 1Pa (under cold, empty, dry furnace) |
| Leakage Rate | 3Pa/h (Average value under cold, empty, dry furnace) |
| Input gas | N2, Ar, |
| Functions | Automatic Positive Pressure, Negative Pressure Leak Detection Vacuum Sintering Partial Pressure Sintering (Static, Dynamic) Pressure Sintering Rapid Cooling Fully-automatic control & Safety interlock& Breakpoint continuing
heating & Wireless remote control& Self-diagnosis |
• Design standards
The equipment is designed in accordance with the pressure vessel
requirements of the Quality and Technical Supervision Bureau, and
is qualified after pressure testing and shipped. The electrical
design and construction meet national standards.
• Installation pre-test and pre-acceptance
The equipment is fully assembled in our factory, including all
pipelines, vacuum pipelines, process gas pipelines, cooling water
pipelines, compressed air pipelines, etc. Pre-testing can be
carried out after installation. At the customer site, pipelines
other than the equipment are provided by the customer. The
installation also includes the connection of all cables. At the
customer site, the main cable connecting the power cabinet is
provided by the customer. After installation, we conduct vacuum and
positive pressure leakage tests on the entire equipment, as well as
mechanical and electrical function tests.
• Disassembly and transportation
The equipment will be disassembled in several large parts, packed
in a standardized manner, and loaded into the transport vehicle.
• Customer site installation and commissioning
The Redel after-sales engineer will lead the team to complete
commissioning, product trial burning and other work within 20
working days. The customer needs to make appropriate preparations
and provide the necessary tools, such as hoisting and lifting
equipment. And provide installation personnel support (it is
recommended to have 1 mechanical personnel and 1 electrical
personnel).
• Final acceptance
After installation and commissioning, the equipment can be finally
accepted in accordance with the requirements of the technical
contract.
• Training
Our after-sales engineers will provide a systematic and complete
on-site training, including operation, maintenance,
troubleshooting, etc.
• Technical data delivery
To ensure safe operation and equipment maintenance, the following
technical data will be provided to customers:
1. Equipment installation layout
2. User manual
3. Spare parts list
4. Electrical drawings
5. Component manual
FAQ
Are you a factory or trading company?
Q: Are you a factory or trading company?
A:We are China leading high-temperature vacuum furnace manufacturer
with over 10 years’ experience.
Do you have customization or OEM service?
Q: Do you have customization or OEM service??
A:Yes,we have powerful R&D team and high-tech equipment.So we
can not only supply the regular model,but also the customizable
furnace as the repuirment of our clients.
What's your advantage?
Q:What's your advantage?
A:
l Quick response to your enquiry
l High quality control
l Stable supply chain
l Timely delivery
l Excellent after-sales service
