Phone Monitored High Temperature Vacuum Furnace Vacuum Leakage Rate
3Pa/H
Technical parameters:
Specifications | RDE-GWL-5518 |
Effective space(w* h * l)mm | 500*500*1800 |
Max.Temperature | 2200℃ |
| Maximum load | 1800Kg |
Vacuum leakage rate:(Average in cold,empty,dry chamber in 3 hours) | 3Pa/h |
| Extreme vacuum | 1.5Pa |
MAX working pressure | 100KPa |
Cooling period(Sintering temperature—100℃) | 600min |
Temperature control mode | 3-zone |
Input gas allowed | Ar,N2,He,H2,CH4,Co2 |
Functions: | vacuum heating,heating flowing gas,Rapid cooling. |
Applications: For Non-metal ceramic/Sic carbide
Vacuum pump: backing pump, Roots-type pump(slide valve pump, rotary vane pump,
screw pump and so on can be selected for the backing pump, allowing
customers to choose world-class brand products)
Power supply: General standard is three phase five wire system AC380V±10% 50HZ.
Control power supply: Single-phase AC210V-250V 50HZ
design(Different countries and regions can be designed according to
local grid standards)
Temperature measurement mode : WRe5-26 thermocouple
Vacuum high temperature sintering furnace preparation
1. A variety of temperature measurement methods (K, S, B, WRe and
other thermocouple, infrared thermometer) or combination of choice;
2. Horizontal furnace, unilateral / bilateral reclaiming method;
vertical furnace, up / down material;
3. high temperature metal (molybdenum, tungsten) / graphite
material heating system selection, to facilitate the different
temperature or material process requirements;
4. Can be equipped with special hydraulic forklift loading and
unloading system;
Competitive Advantage:
1. The Insulation box is of good insulation effect, free of
volatilization athigh temperature, with long life.It adopts
“sandwich structure”and CFC material inside and outside with high
strength, will be no deformation afteer many years use.
2. Program has resume-heat-at-breakpoint function, no need to
restart the program in case of short time power failure.
3. Convenient and intelligent: The control interface of sintering
furnace can be monitored by mobile phone, control and understand
the running state of the equipment anytime and anywhere. Fully
automatic one-key operation function, realize the supervision of
multiple devices by one person, intelligent production, and docking
ERP management system.
4. Complete after-sales service system: Provides 7 x 24 hour
telephone hotline. Propose solutions within 2 hours after receiving
the customer's fault notice. With 15 experienced professional
after-sales service staff, not only responsible for the company's
product installation and debugging, but also for the need of users
to complete the domestic and foreign manufacturers of sintering
furnace after-sales and maintenance work.
5. Convenient service: If the customer has the demand may carry on
the sintering product test in the Ruideer company site, and the
company production site has the hot state pressure condition.
6. Quick installation: The installation can be completed and put
into production within 15 days when water, electricity and gas are
in place.
