Sign In | Join Free | My himfr.com
Home > Sinter HIP Furnace >

Dewaxing Vacuum Pressure Sinter HIP Furnace for Roll and Hammer

Zhuzhou Ruideer Metallurgy Equipment Manufacturing Co.,Ltd
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now
    Buy cheap Dewaxing Vacuum Pressure Sinter HIP Furnace for Roll and Hammer from wholesalers
     
    Buy cheap Dewaxing Vacuum Pressure Sinter HIP Furnace for Roll and Hammer from wholesalers
    • Buy cheap Dewaxing Vacuum Pressure Sinter HIP Furnace for Roll and Hammer from wholesalers

    Dewaxing Vacuum Pressure Sinter HIP Furnace for Roll and Hammer

    Ask Lasest Price
    Brand Name : Ruideer
    Model Number : 500*500*1800
    Certification : CE;ISO9001;ISO14001;OHSAS 18001;GB/T29490
    Price : Negotiable
    Payment Terms : L/C, T/T
    Supply Ability : 8 sets/month
    Delivery Time : 100-120 work days
    • Product Details
    • Company Profile

    Dewaxing Vacuum Pressure Sinter HIP Furnace for Roll and Hammer

    Sinter-HIP Furnace For Dewaxing And Vacuum/Pressure Sintering Of Cemented Carbide Workpiece Such As Roll And Hammer.


    Equipment system
    It mainly includes control system, heating system, degreasing system (positive and negative pressure degreasing), vacuum system, cooling water system, rapid cooling system, safety system and auxiliary system.


    Main requirements

    1.The equipment has high quality reliability, can work steadily and continuously; The service life of the furnace shell of the equipment is more than 6000 times or 20 years.

    2.The equipment must have good maneuverability, maintainability, safety performance and environmental protection, and not pollute the environment and endanger human health.
    3.The equipment is a standard product made with perfect technology. Comply with the specified quality, specification and performance requirements.


    Technical parameters

    Furnace shell design service life20 years
    Furnace shell design use times≥6000 circles
    Effective working zone(W*H*L)500×500×1800mm
    Max.loading capacity of alloys1800Kg(with graphite plates)
    Design pressure6.5MPa
    Max.working pressure6MPa
    Max.Temp.1600℃
    Working Temp.≤1580℃
    Temperature uniformity during the process of vacuum and sintering≤±6℃
    Heating up rateWhen the full load is 800kg, the vacuum condition is small. The heating rate can reach 8℃/min in the temperature range of 450℃ to 1200℃.
    Ultimate vacuum degreeThe vacuum of the empty furnace should reach 5x10-2mbar 15 minutes after the vacuum is started, and 5x10-3mbar 2 hours after the vacuum is pumped.
    High pressure gas filling timeGas charging time can be set and precisely controlled. Intermittent stable inflation to 60bar and filling time coincides with the set value.
    Leakage rateContinue pumping for 1 hour in the ultimate vacuum at room temperature, and then test by pressure rise method within 2 hours (read once every 20 minutes),the leakage rate should less or equal than 5x10-3 mbar/s.
    Cooling time≤8h
    Uninterruptible power supply guarantee timePower the indicator light and control the furnace in case of power failure,the continue time≥80min.
    Heating power600KVA

    After sales:

    1. Installation, Commissioning and Acceptance

    We do installation, commissioning and acceptance in buyer's plant.During the installation and commissioning period, the commissioning personnel shall be provided free of charge by the demander according to the staff standard.

    The equipment shipped to the buyer, the seller received the buyer's notification, both within a week to carry the equipment out of the box together, then check the equipment and all components according to the packing list . Including equipment accessories, spare parts and special tools, attached manual and technical documents, etc. It can be installed after the acceptance check of equipment.
    After installation and debugging, the equipment shall be accepted according to the technical accessories.


    2. Training

    When taking-over the Furnace to the customer, We will give a staff training to customer. The operating personnel of the customer should join to commission,test the furnace, when installing at customer’s company.
    This is practical operation training and practical maintenance training,and our technical personnel will telling the basic principle,equipment maintenance knowledge,And the common fault handling measures.We can training 2 ~ 3 workers. ( Training how to maintenance and operating.)


    3. Warranty period

    The warranty period of the equipment is 12 months, which starts from the date of installation and debugging of the supplier. Equipment failure happens, after-sales service personnel shall give solutions within 2 hours, after receiving the buyer's notification . If it is need to go to the site for treatment , operators dispatched by seller should arrive at the site within 48 hours after go aboard. In case of emergency,operators should arrive at the site within 48 hours after go aboard, and continue to make repairs until the fault is removed and the equipment returns to normal.


    Quality Dewaxing Vacuum Pressure Sinter HIP Furnace for Roll and Hammer for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Zhuzhou Ruideer Metallurgy Equipment Manufacturing Co.,Ltd
    *Subject:
    *Message:
    Characters Remaining: (0/3000)